finished! is250
- brenzbmr@sb
- Booty Connoisseur
- Posts: 1609
- Joined: Wed Dec 06, 2006 9:49 pm
- Location: as ziggy marley said" on a beach in hawaii"
finished! is250
sup fam! its been a long time and i have been so busy but i wanted to post pictures of the car that i started long ago. for those that remember i had a ground kit molded and after many attempts to
paint it due to the crappy urathane material i finally chucked the kit. dont and i say dont buy ebay kits and sand them. just paint your primer and paint it with all its imperfections. those crappy kits seem to not hold any primer. we tried everything from adhesion promoter to coating it with super adhesives to get it to stick. all fail. at the end i waited for a company in japan to release a kit and i purchased it. 4 months ago i recieved it and then i started finishing everything i started. the moral was so low these last couple of years due to the failure of getting anywhere forward with car.
here is some pictures of it as it is now. full modded front for even lower stance then before. also relipped both my wheels to wider specs and completely cambered the hell out of it. the fronts will get
t demand UCA and Shortend Knuckles soon and then i can space them and install my BBK.
i ended up installing morel supremo tweeters with elate midrange. center will be morel 4 inch and rear fill will be also morel. amps are elite 4 and elite 5 running two titanium 12s in a 2.0 sealed box.
aloha
paint it due to the crappy urathane material i finally chucked the kit. dont and i say dont buy ebay kits and sand them. just paint your primer and paint it with all its imperfections. those crappy kits seem to not hold any primer. we tried everything from adhesion promoter to coating it with super adhesives to get it to stick. all fail. at the end i waited for a company in japan to release a kit and i purchased it. 4 months ago i recieved it and then i started finishing everything i started. the moral was so low these last couple of years due to the failure of getting anywhere forward with car.
here is some pictures of it as it is now. full modded front for even lower stance then before. also relipped both my wheels to wider specs and completely cambered the hell out of it. the fronts will get
t demand UCA and Shortend Knuckles soon and then i can space them and install my BBK.
i ended up installing morel supremo tweeters with elate midrange. center will be morel 4 inch and rear fill will be also morel. amps are elite 4 and elite 5 running two titanium 12s in a 2.0 sealed box.
aloha
You may have subs in your car........but my doors sound better!
Re: finished! is250
Killer install, as always!
Re: finished! is250
WOW!!! Nice job on the build!
Re: finished! is250
do you think the cheap body kit was just dirty and had something the primer/paint would not stick too? I just sprayed my first car an got something in a cup of primer but thankfully caught it and stopped before I did more then one part.
what else can I say I am a grumpy asshole most of the time.
- brenzbmr@sb
- Booty Connoisseur
- Posts: 1609
- Joined: Wed Dec 06, 2006 9:49 pm
- Location: as ziggy marley said" on a beach in hawaii"
Re: finished! is250
no, it was a cheap lip kit. problem was that we sanded it. had we just painted over it we would have been fine. since we molded it to stock bumpers the "coating" they put on was sanded off and
the solvents were being released. it took two years of messing with it just for it to stay on longer then two weeks.
at first we didnt know what was causing it other then it was releasing something. after sealing it and then prepping with all the tricks in the book it still would flake off. only the places that were not sanded stuck.
thats when i finally threw in the towel and decided to save some money to get a good kit.
when blackpearlcomplete released there kit i was the first person to buy it in US.
still think i am only person in US with this kit.
i am just glad that the 3 year night mare is done. the pg elite mids that i was gonna use ended up in my daughters car so i didnt remove them since she likes them. i ended up just buying morel supremos and kept the amps and bought two titanium 12s
overall its really nice sounding.
what i wanted for this car.
the solvents were being released. it took two years of messing with it just for it to stay on longer then two weeks.
at first we didnt know what was causing it other then it was releasing something. after sealing it and then prepping with all the tricks in the book it still would flake off. only the places that were not sanded stuck.
thats when i finally threw in the towel and decided to save some money to get a good kit.
when blackpearlcomplete released there kit i was the first person to buy it in US.
still think i am only person in US with this kit.
i am just glad that the 3 year night mare is done. the pg elite mids that i was gonna use ended up in my daughters car so i didnt remove them since she likes them. i ended up just buying morel supremos and kept the amps and bought two titanium 12s
overall its really nice sounding.
what i wanted for this car.
You may have subs in your car........but my doors sound better!
Re: finished! is250
The car looks fantastic. Any more pics of the install?
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
- brenzbmr@sb
- Booty Connoisseur
- Posts: 1609
- Joined: Wed Dec 06, 2006 9:49 pm
- Location: as ziggy marley said" on a beach in hawaii"
Re: finished! is250
this is all i have
most of the time during initial build it was during a crunch time and i missed the opprotunity to take pictures.
here is the link if u havent seen it already.
http://www.phoenixphorum.com/viewtopic.php?f=10&t=24496
most of the time during initial build it was during a crunch time and i missed the opprotunity to take pictures.
here is the link if u havent seen it already.
http://www.phoenixphorum.com/viewtopic.php?f=10&t=24496
You may have subs in your car........but my doors sound better!
- Bfowler
- Briaans..... BRIAAAAANNNNNNS
- Posts: 10766
- Joined: Wed Dec 06, 2006 11:06 am
- Location: So easy, a cavewomen could do him
Re: finished! is250
been watching this on FB too. that turned out fuckin sweet
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
i've had tougher choices at a soda machine...
-
- Posts: 442
- Joined: Sat Sep 11, 2010 5:18 am
- Location: Minnesota
Re: finished! is250
That car looks downright MEAN!! I love the low stance. Great looking system in the back too! I wish I had install skills like that.
-
- Posts: 1653
- Joined: Sun May 06, 2012 8:01 am
Re: finished! is250
Killer install but what happen to the rear wheels? Something break on you?
Re: finished! is250
I think that is the new trend I have seen lots of cars that way now days looks like it allows a wider rim and still kinda tucks into the wheel well I could be wrong. Sure looks rough on tires tho.trickyricky wrote:Killer install but what happen to the rear wheels? Something break on you?
Re: finished! is250
I am sure he is kidding. That is what you have to do to tuck big wheels on a lowered car. I can't say I am a fan but can appreciate the originality of it and the work that went into it.
what else can I say I am a grumpy asshole most of the time.
Re: finished! is250
I had a 1968 bettle slammed and the rear tire were close to that it was not to bad I would go through ture every 4 year but it was a summer car I love it
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
- brenzbmr@sb
- Booty Connoisseur
- Posts: 1609
- Joined: Wed Dec 06, 2006 9:49 pm
- Location: as ziggy marley said" on a beach in hawaii"
Re: finished! is250
another car show event.
aloha!
aloha!
You may have subs in your car........but my doors sound better!
Re: finished! is250
its about time you showed it off some more. Still looking good, paint still hangin on?
what else can I say I am a grumpy asshole most of the time.